Silverline Soft Close Drawer Slide Ball Bearing Runners Full Extension - 10 Pair

Description

Most Kitchen Cabinets have a depth of 24 inches, so 22 inches are our most popular sold drawer slides.
Bathrooms usually have a depth of 20 inches, so 18 inches are most appropriate.
Please measure twice before placing your order. Measure the distance from the front edge of the cabinet to the inside face of the cabinet back and then subtract 1".
Before installing the slides, separate the cabinet and drawer members. There is no difference between the left and right slide, the release lever moves upward on the left hand side and downward on the right hand side.
Drawer must be ½” narrower than cabinet opening on each side. Top and bottom drawer should have 1/8” minimum clearance from the cabinet opening.
Install Cabinet Members First:
1. Using a level, place and align cabinet member into position. For Overlay Drawer Fronts, align the front of the cabinet member with the front edge of the cabinet. For Inset Drawer Fronts, setback the front of the cabinet member the thickness of the drawer front.
2. Fasten each side with two pan-head wood screws into the horizontal slots.
Install Drawer Member:
1. Align the front edge of the drawer member with the front edge of the drawer box.
2. Fasten each member with two #8 x 7/16” or #8 x 1/2" pan-head screws in the vertical slots.
Inserting Drawer
:
1. Push intermediate member all the way back and pull the ball bearing retainer all the way forward to the front of the cabinet. Insert drawer member into ball bearing retainer channel and close. The drawer release lever will lock as drawer is closed.
2. If necessary, adjust the height of the drawer using the vertical slots on the drawer member; and the depth of the drawer by adjusting the horizontal slots on the cabinet member.
3. When all adjustments are complete, install an additional screw in the center hole on the cabinet and drawer member to lock the slide members in position. At least two locking screws per member are recommended for supporting heavy objects and to avoid tear-out of slide.
NOTE: Face-frame cabinets require rear face-frame brackets
WHEN SELECTING SOFT CLOSE OR REGULAR, SELECTING SOFT CLOSE MEANS SOFT CLOSING SLIDES; REGULAR SLIDES ARE NOT SOFT CLOSING
Package Include:
10 pairs of drawer slides (20 packs)
Note：
Rear mount brackets are
NOT
included, please purchase separately。
Screws
NOT
include。
Frameless Cabinets do not require Rear Brackets.
Face Frame Cabinets do require Rear Brackets to mount the slides.
Depth (Thickness): 0.5", Width: 1-13/16", Length: Your Selection
Solf close rails means no more slamming drawers
Full Extension 100 lb capacity 46mm Ball Bearing Side Mount; 75 lb capacity with 43mm Ball Bearings
Sold as a Set of 10 Pairs
Ships in 1 Business Day
Located in Los Angeles
Return Policy:
* Buyers must contact us for refunds, exchanges, or repairs.
* Buyers are responsible for shipping the order back with a tracking number.
* Any returns must be accompanied by an invoice or packing slip.
*
The
returns
product must be uninstalled and can be sellable
*
20% restocking fee will be charged for return.
* Customers may ask for a prepaid shipping label with the cost of that shipping
label to be deducted from the refund amount. This can only be done within the first 15 days of receipt of the order.